Low Current, High PerformanceNPN Silicon Bipolar TransistorTechnical Data
Features
• High Performance BipolarTransistor Optimized forLow Current, Low VoltageOperation
• 900 MHz Performance:
AT-30511: 1.1 dB NF, 16dBGAAT-30533: 1.1 dB NF, 13dBGA• Characterized for End-Of-Life Battery Use (2.7 V)• SOT-23 and SOT-143 SMTPlastic Packages
• Tape-And-Reel PackagingOption Available[1]
Outline Drawing
EMITTERCOLLECTOR
305BASE
EMITTER
SOT-143 (AT-30511)
COLLECTOR
305BASE
EMITTER
SOT-23 (AT-30533)
Note:
1. Refer to “Tape-and-Reel Packaging forSemiconductor Devices”.
Description
Hewlett-Packard’s AT-30511 andAT-30533 are high performanceNPN bipolar transistors that havebeen optimized for maximum fT atlow voltage operation, makingthem ideal for use in battery
powered applications in wirelessmarkets. The AT-30533 uses the 3lead SOT-23, while the AT-30511places the same die in the higherperformance 4 lead SOT-143. Bothpackages are industry standard,and compatible with high volumesurface mount assemblytechniques.
The 3.2 micron emitter-to-emitterpitch and reduced parasitic designof these transistors yieldsextremely high performance
products that can perform a multi-plicity of tasks. The 5 emitterfinger interdigitated geometryyields an extremely fast transistorwith high gain and low operatingcurrents.
4-23AT-30511AT-30533
Optimized performance at 2.7 Vmakes these devices ideal for usein 900 MHz, 1.8 GHz, and 2.4 GHzbattery operated systems as anLNA, gain stage, buffer, oscillator,or active mixer. Typical amplifierdesigns at 900 MHz yield 1.3 dBnoise figures with 13dB or moreassociated gain at a 2.7 V, 1 mAbias. Voltage breakdowns are highenough for use at 5 volts. Highgain capability at 1V, 1 mA makesthese devices a good fit for900␣MHz pager applications.The AT-3 series bipolar transistorsare fabricated using an optimizedversion of Hewlett- Packard’s10␣GHz fT, 30 GHz fMAX Self-Aligned-Transistor (SAT) process.The die are nitride passivated forsurface protection. Excellentdevice uniformity, performanceand reliability are produced by theuse of ion-implantation, self-alignment techniques, and goldmetalization in the fabrication ofthese devices.
5965-8918E
元器件交易网www.cecb2b.com
AT-30511, AT-30533 Absolute Maximum Ratings
SymbolVEBOVCBOVCEOICPTTjTSTG
Notes:
1. Operation of this device above any one of these parameters may cause permanentdamage.
2. TMounting Surface = 25°C.
3. Derate at 1.82 mW/°C for TC > 95°C.
ParameterUnitsEmitter-Base VoltageVCollector-Base VoltageVCollector-Emitter VoltageVCollector CurrentmAPower Dissipation[2] [3]mWJunction Temperature°CStorage Temperature°CAbsolute Maximum
1.5115.58100150-65 to 150
[1] Thermal Resistance:
θjc = 550°C/W
[2]Electrical Specifications, TA = 25°C
AT-30511SymbolNFGAhFEICBOIEBOParameters and Test ConditionsNoise FigureVCE = 2.7 V, IC = 1 mAAssociated GainVCE = 2.7 V, IC = 1 mAForward CurrentTransfer RatioCollector Cutoff CurrentEmitter Cutoff Currentf = 0.9 GHzf = 0.9 GHzVCE = 2.7 VIC = 1 mAVCB = 3 VVEB = 1 VUnitsdBdB-µAµA14[1]AT-30533MinTyp1.111300[2][2]MinTyp1.116[1]Max1.4[1]Max1.4[2][1]13[2]700.030.1700.030.13000.21.50.21.5Notes:
1. Test circuit B, Figure 1. Numbers reflect device performance de-embedded from circuit losses.Input loss = 0.4 dB; output loss = 0.4 dB.
2. Test circuit A, Figure 1. Numbers reflect device performance de-embedded from circuit losses.Input loss = 0.4 dB; output loss = 0.4 dB.
VBBW = 10 L = 18601000 pFW = 10 L = 1000W = 30 L = 100W = 30 L = 100W = 10 L = 1025VCCW = 10 L = 186025 Ω1000 pFTEST CIRCUITBOARD MATL = 0.062\" FR-4 (ε = 4.8)DIMENSIONS IN MILSTEST CIRCUIT A: W = 20 L = 100TEST CIRCUIT B: W = 20 L = 200 x 2 NOT TO SCALEFigure 1. Test Circuit for Noise Figure and Associated Gain. This Circuit is aCompromise Match Between Best Noise Figure, Best Gain, Stability, a Practical,Synthesizable Match, and a Circuit Capable of Matching Both the AT-305 andAT-310 Geometries.
4-24
元器件交易网www.cecb2b.com
AT-30511, AT-30533 Characterization Information, TA = 25°C
AT-30511AT-30533SymbolP1dB Parameters and Test ConditionsPower at 1 dB Gain Compression (opt tuning)VCE = 2.7 V, IC = 5 mAGain at 1 dB Gain Compression (opt tuning)VCE = 2.7 V, IC = 5 mAOutput Third Order Intercept Point,VCE = 2.7 V, IC = 5 mA (opt tuning)Gain in 50 Ω System; VCE = 2.7 V, IC = 1 mACollector-Base Capacitancef = 0.9 GHzf = 0.9 GHzf = 0.9 GHzf = 0.9 GHzVCB = 3V, f = 1 MHzUnitsdBmdBdBmdBpFTyp716.517100.04Typ7151790.04G1dBIP3|S21|E2CCBTypical Performance
2.525252.0NOISE FIGURE (dB)AMPLIFIER NF205 mAGa (dB)205 mAGa (dB)151.5151.0NF MIN.101 mA5101 mA 500.51 mA5 mA000.51.01.52.02.5000.51.01.52.02.500.51.01.522.5FREQUENCY (GHz)FREQUENCY (GHz)FREQUENCY (GHz)
Figure 2. AT-30511 and AT-30533Minimum Noise Figure and AmplifierNF[1] vs. Frequency and Current atVCE=2.7V.
10Figure 3. AT-30511 Associated Gain atOptimum Noise Match vs. Frequencyand Current at VCE= 2.7 V.Figure 4. AT-30533 Associated Gain atOptimum Noise Match vs. Frequencyand Current at VCE= 2.7 V.
2525820G 1dB (dBm)G 1dB (dBm)20P 1dB (dBm)65 mA5 mA152 mA10155 mA42 mA102 mA20505000.51.01.52.02.500.51.01.52.02.500.51.01.52.02.5FREQUENCY (GHz)FREQUENCY (GHz)FREQUENCY (GHz)Figure 5. AT-30511 and AT-30533Power at 1 dB Gain Compression vs.Frequency and Current at VCE= 2.7 V.Figure 6. AT-30511 1 dB CompressedGain vs. Frequency and Current atVCE= 2.7V.Figure 7. AT-30533 1 dB CompressedGain vs. Frequency and Current atVCE= 2.7V.
Note:
1. Amplifier NF represents the noise figure which can be expected in a real circuit representing reasonable reflection coefficients andincluding circuit losses.
4-25
元器件交易网www.cecb2b.com
AT-30511, AT-30533 Typical Performance, continued
108)mB65 mAd( Bd14 P2 mA2000.51.01.52.02.5FREQUENCY (GHz)Figure 8. AT-30511 and AT-30533Power at 1 dB Gain Compression vs.Frequency and Current at VCE=5V.
6
4
)m5 mA
B2d( Bd10
P2 mA
-2-4
00.51.01.52.02.5FREQUENCY (GHz)Figure 11. AT-30511 and AT-30533Power at 1 dB Gain Compression vs.Frequency and Current at VCE=1V.252.5202.0)GaBd()m151.5 ERBUd(G Ia101.0FG NFESIO50.5N0-500501000TEMPERATURE (°C)Figure 14. AT-30511 Noise Figure andAssociated Gain at VCE= 2.7 V,IC=␣1␣mA vs. Temperature in TestCircuit, Figure 1. (Circuit LossesDe-embedded)25205 mA)mB15d( B2 mAd1 10G5000.51.01.52.02.5FREQUENCY (GHz)Figure 9. AT-30511 1 dB CompressedGain vs. Frequency and Current atVCE=5V.
25 20)5 mAmB15d( Bd1 102 mAG5000.51.01.52.02.5FREQUENCY (GHz)Figure 12. AT-30511 1 dB CompressedGain vs. Frequency and Current atVCE= 1 V.252.5202.0)Bd( )Gam151.5ERBUd(G Ia10FG NF1.0ESIO50.5N0-500501000TEMPERATURE (°C)Figure 15. AT-30533 Noise Figure andAssociated Gain at VCE= 2.7 V,IC=␣1␣mA vs. Temperature in TestCircuit, Figure 1. (Circuit Losses De-embedded)
4-26
2520)m5 mAB15d( B d1 102 mAG5000.51.01.52.02.5FREQUENCY (GHz)
Figure 10. AT-30533 1 dB CompressedGain vs. Frequency and Current atVCE=5V.
25
20)mB155 mAd( Bd12 mA 10G5000.51.01.52.02.5FREQUENCY (GHz)Figure 13. AT-30533 1 dB CompressedGain vs. Frequency and Current atVCE=1V.
0IM3 (dBc)IM5 (dBc)IM7 (dBc)-20)cBd(-40 3MI-60-80-9-6-3036POWER PER TONE (dBm)Figure 16. AT-30511 and AT-30533Intermodulation Products vs. OutputPower at VCE= 2.7 V, IC= 10 mA,900␣MHz with Optimal Tuning.
元器件交易网www.cecb2b.com
AT-30511 Typical Scattering Parameters, VCE = 1 V, IC = 1 mA, Common Emitter, ZO = 50 Ω
Freq.GHz0.10.50.91.01.51.82.02.43.04.05.0
S11
MagAng0.970.950.850.830.700.630.590.500.390.290.27
-5-24-42-46-67-78-85-100-122-161153
dB10.8410.519.969.668.718.067.756.735.583.972.64
S21Mag3.483.353.153.042.732.532.442.171.901.581.36
Ang1751551371331131029684674525
dB-39.42-25.87-21.46-20.71-18.44-17.69-17.27-16.79-16.32-15.87-15.47
S12Mag0.010.050.080.090.120.130.140.140.150.160.17
30Ang8672615846413732272020
S22
MagAng0.990.950.920.910.840.800.770.730.680.630.61
-2-14-24-26-36-40-43-48-53-63-72
AT-30511 Typical Noise Parameters,Common Emitter, ZO = 50 Ω, 1 V, IC = 1 mAGAIN (dB)FreqGHz0.5[2]0.91.82.4Fmin[1]dB0.30.40.91.3ΓOPTMag0.960.920.830.76Ang10194360Rn1.491.330.980.7420MSGMAGS21MSG100Notes:1. Matching constraints may make Fmin values associated with high |Γopt| valuesunachievable in physical circuits. See Fig. 2 for expected performance.2. 0.5 GHz noise parameter values are extrapolated, not measured.012345FREQUENCY (GHz)Figure 17. AT-30511 Gains vs.Frequency at VCE= 1 V, IC= 1 mA.AT-30533 Typical Scattering Parameters, VCE = 1 V, IC = 1 mA, Common Emitter, ZO = 50 ΩFreq.GHz0.10.50.91.01.51.82.02.43.04.05.0S11MagAng0.950.910.770.730.550.460.410.300.170.020.12-5-25-41-45-62-71-76-85-95-13961dB10.9010.329.449.037.756.946.515.454.262.711.56S21Mag3.513.282.972.832.442.222.121.871.631.371.20Ang174150128124102918573573719dB-38.36-25.08-20.95-20.21-18.13-17.33-16.84-16.05-14.80-12.58-10.14S12Mag0.010.060.090.100.120.140.140.160.180.240.3130Ang8773636154515049494845S22MagAng0.990.950.890.880.800.770.740.710.680.650.62-3-14-24-25-33-36-38-41-46-57-69AT-30533 Typical Noise Parameters,Common Emitter, ZO = 50 Ω, 1 V, IC = 1 mAGAIN (dB)FreqGHz0.5[2]0.91.82.4Fmin[1]dB0.30.40.91.3ΓOPTMag0.940.890.750.65Ang716436520Rn1.020.860.580.38MSGMAGS21MSG100Notes:
1. Matching constraints may make Fmin values associated with high |Γopt| valuesunachievable in physical circuits. See Fig. 2 for expected performance.2. 0.5 GHz noise parameter values are extrapolated, not measured.
012345FREQUENCY (GHz)4-27
Figure 18. AT-30533 Gains vs.
Frequency at VCE= 2.7 V, IC= 1 mA.
元器件交易网www.cecb2b.com
AT-30511 Typical Scattering Parameters, VCE = 2.7 V, IC = 1 mA, Common Emitter, ZO = 50 Ω
Freq.GHz0.10.50.91.01.51.82.02.43.04.05.0
S11
MagAng0.970.950.860.840.720.650.610.520.410.300.26
-5-23-39-43-63-73-80-93-114-150165
dB10.8810.5810.099.838.948.328.067.065.924.353.06
S21Mag3.503.383.203.102.802.602.532.251.981.651.42
Ang1751561391351151059986704828
dB-40.13-26.71-22.28-21.51-19.15-18.28-17.83-17.29-16.72-16.13-15.65
S12Mag0.010.050.080.080.110.120.130.140.150.160.16
30Ang8674636049434035302322
S22
MagAng0.9990.960.930.920.850.820.790.750.700.660.63
-2-13-23-25-34-38-41-46-51-61-69
AT-30511 Typical Noise Parameters,
Common Emitter, ZO = 50 Ω, 2.7 V, IC = 1 mA
GAIN (dB)FreqGHz0.5[2]0.91.82.4
Fmin[1]dB0.30.40.91.3
ΓOPT
Mag0.960.920.830.76
Ang10194360
Rn1.491.330.980.74
20MSGMAGS2110Notes:
1. Matching constraints may make Fmin values associated with high |Γopt| valuesunachievable in physical circuits. See Fig. 2 for expected performance.2. 0.5 GHz noise parameter values are extrapolated, not measured.
0012345FREQUENCY (GHz)Figure 19. AT-30511 Gains vs.
Frequency at VCE= 2.7 V, IC= 1 mA.
AT-30533 Typical Scattering Parameters, VCE = 2.7 V, IC = 1 mA, Common Emitter, ZO = 50 Ω
Freq.GHz0.10.50.91.01.51.82.02.43.04.05.0
S11
MagAng0.950.920.780.750.580.490.440.330.210.050.09
-5-23-39-42-59-66-71-79-87-8847
dB10.7610.219.429.047.837.046.645.594.402.871.72
S21Mag3.453.242.962.832.462.252.151.901.661.391.22
Ang174151130126105948876604022
dB-39.49-26.05-21.78-21.05-18.88-18.08-17.58-16.77-15.50-13.20-10.67
S12Mag0.010.050.080.090.110.120.130.150.170.220.29
30Ang8774646355535251515249
S22
MagAng0.9990.950.910.900.830.790.770.740.710.680.66
-2-13-22-23-31-34-36-39-44-54-66
AT-30533 Typical Noise Parameters,
Common Emitter, ZO = 50 Ω, 2.7 V, IC = 1 mA
GAIN (dB)FreqGHz0.5[2]0.91.82.4
Fmin[1]dB0.30.40.91.3
ΓOPT
Mag0.940.890.750.65
Ang7164365
Rn1.020.880.580.38
20MSGMAG10S21MSGNotes:
1. Matching constraints may make Fmin values associated with high |Γopt| valuesunachievable in physical circuits. See Fig. 2 for expected performance.2. 0.5 GHz noise parameter values are extrapolated, not measured.
0012345FREQUENCY (GHz)4-28
Figure 20. AT-30511- Gains vs.
Frequency at VCE= 2.7 V, IC= 1 mA.
元器件交易网www.cecb2b.com
AT-30511 Typical Scattering Parameters, VCE = 2.7 V, IC = 5 mA, Common Emitter, ZO = 50 Ω
Freq.GHz0.10.50.91.01.51.82.02.43.04.05.0
S11
MagAng0.880.700.490.460.300.240.210.160.130.150.21
-11-48-72-77-100-112-120-140-172137106
dB22.4920.4217.7717.0914.4413.1012.3110.949.187.035.44
S21Mag13.3210.497.737.155.274.524.133.522.882.251.87
Ang16913411110789817667553822
dB-40.50-28.45-25.24-24.70-22.62-21.65-21.05-20.01-18.55-16.57-14.88
S12Mag0.010.040.050.060.070.080.090.100.120.150.18
30Ang8364575553525250484439
S22
MagAng0.970.820.700.690.620.590.580.570.550.530.52
-5-22-30-31-35-37-39-42-46-55-64
AT-30511 Typical Noise Parameters,
Common Emitter, ZO = 50 Ω, 2.7 V, IC = 5 mA
Mag0.770.710.600.51
Ang9184565
1.100.960.660.47
GAIN (dB)FreqGHz0.5[2]0.91.82.4
Fmin[1]dB1.11.21.51.8
ΓOPT
MSGRn
2010S21MAGNotes:
1. Matching constraints may make Fmin values associated with high |Γopt| valuesunachievable in physical circuits. See Fig. 2 for expected performance.2. 0.5 GHz noise parameter values are extrapolated, not measured.
0012345FREQUENCY (GHz)Figure 21. AT-30511 Gains vs.
Frequency at VCE= 2.7 V, IC= 5 mA.
AT-30533 Typical Scattering Parameters, VCE = 2.7 V, IC = 5 mA, Common Emitter, ZO = 50 Ω
Freq.GHz0.10.50.91.01.51.82.02.43.04.05.0
S11MagAng0.840.570.370.340.230.200.190.170.150.150.17
-12-39-46-46-43-38-35-27-17-211
dB22.2618.5414.9714.2011.249.859.057.706.124.303.07
S21Mag12.988.465.605.133.653.112.842.432.021.641.42
Ang1641211009681736961503419
dB-39.96-28.03-24.09-23.32-20.30-18.88-18.02-16.50-14.57-11.90-9.66
S12Mag0.010.040.060.070.100.110.130.150.190.250.33
30
Ang8271706968676664615547
S22
MagAng0.980.800.730.720.690.680.680.670.660.640.61
-5-18-22-22-26-28-30-33-39-49-61
AT-30533 Typical Noise Parameters,
Common Emitter, ZO = 50 Ω, 2.7 V, IC = 5 mA
GAIN (dB)FreqGHz0.5[2]0.91.82.4
Fmin[1]dB1.11.21.51.8
ΓOPT
Mag0.710.610.420.28
Ang8163957
Rn0.780.660.410.25
20
MSG
MAG
10
S21
MSG
Notes:
1. Matching constraints may make Fmin values associated with high |Γopt| valuesunachievable in physical circuits. See Fig. 2 for expected performance.2. 0.5 GHz noise parameter values are extrapolated, not measured.
0
012345
FREQUENCY (GHz)
4-29
Figure 22. AT-30533 Gains vs.
Frequency at VCE= 2.7 V, IC= 5 mA.
元器件交易网www.cecb2b.com
AT-30511 Typical Scattering Parameters, VCE = 5 V, IC = 1 mA, Common Emitter, ZO = 50 Ω
Freq.GHz0.10.50.91.01.51.82.02.43.04.05.0
S11
MagAng0.980.960.880.850.740.670.630.550.430.310.25
-5-21-37-41-59-69-75-88-106-138178
dB10.5610.309.839.578.718.137.886.905.794.293.04
S21Mag3.373.273.103.012.732.552.482.211.951.641.42
Ang17515713913611610610087714929
dB-40.34-26.99-22.52-21.75-19.23-18.34-17.85-17.23-16.53-15.83-15.38
S12Mag0.010.040.070.080.110.120.130.140.150.160.17
30Ang8774646251454237312320
S22
MagAng0.9990.960.930.920.860.820.800.770.720.670.64
-2-13-22-24-33-38-41-45-50-60-69
AT-30511 Typical Noise Parameters,
Common Emitter, ZO = 50 Ω, 5 V, IC = 1 mA
GAIN (dB)FreqGHz0.5[2]0.91.82.4
Fmin[1]dB0.30.40.91.3
ΓOPT
Mag0.960.920.830.76
Ang10194360
Rn1.491.330.980.74
20MSGMAGS2110Notes:
1. Matching constraints may make Fmin values associated with high |Γopt| valuesunachievable in physical circuits. See Fig. 2 for expected performance.2. 0.5 GHz noise parameter values are extrapolated, not measured.
0012345FREQUENCY (GHz)Figure 23. AT-30511 Gains vs.Frequency at VCE= 5 V, IC= 1 mA.
AT-30533 Typical Scattering Parameters, VCE = 5 V, IC = 1 mA, Common Emitter, ZO = 50 Ω
Freq.GHz0.10.50.91.01.51.82.02.43.04.05.0
S11
MagAng0.960.920.790.770.600.510.460.350.230.070.07
-5-22-37-41-57-64-69-76-83-8538
dB10.5910.079.328.947.767.016.615.594.432.921.79
S21Mag3.383.192.922.802.442.242.141.901.661.401.23
Ang174151131127106958977614123
dB-39.38-26.22-21.99-21.21-19.02-18.16-17.66-16.85-15.58-13.34-10.85
S12Mag0.010.050.080.090.110.120.130.140.170.220.29
30Ang8574656356545251515249
S22
MagAng0.9990.950.910.900.830.800.780.750.720.690.67
-2-13-21-23-30-33-35-39-43-53-65
AT-30533 Typical Noise Parameters,
Common Emitter, ZO = 50 Ω, 5 V, IC = 1 mA
Mag0.940.890.750.65
Ang7164365
GAIN (dB)FreqGHz0.5[2]0.91.82.4
Fmin[1]dB0.30.40.91.3
ΓOPT
Rn1.020.980.580.38
20MSGMAGS21010MSGNotes:
1. Matching constraints may make Fmin values associated with high |ΓOPT| valuesunachievable in physical circuits. See Figure 2 for expected performance.2. 0.5 GHz noise parameter values are extrapolated, not measured.
012345FREQUENCY (GHz)4-30
Figure 24. AT-30533 Gains vs.Frequency at VCE= 5 V, IC= 1 mA.
元器件交易网www.cecb2b.com
AT-30511 Typical Scattering Parameters, VCE = 5 V, IC = 5 mA, Common Emitter, ZO = 50 Ω
Freq.GHz0.10.50.91.01.51.82.02.43.04.05.0
S11
MagAng0.900.740.530.490.330.270.240.180.120.110.17
-10-43-66-70-89-99-105-120-147154114
dB22.2620.4117.9317.2814.7213.4112.6411.279.547.415.86
S21Mag12.9810.497.887.315.454.684.293.663.002.351.96
Ang17013611310991837869574024
dB-40.75-28.46-25.18-24.53-22.46-21.45-20.87-19.79-18.34-16.45-14.84
S12Mag0.010.040.060.060.080.080.090.100.120.150.18
30Ang8266585754535250484338
S22
MagAng0.970.830.720.700.630.600.590.570.550.530.52
-5-22-30-31-36-38-39-42-46-55-63
AT-30511 Typical Noise Parameters,
Common Emitter, ZO = 50 Ω, 5 V, IC = 5 mA
Mag0.770.710.600.51
Ang9184565
GAIN (dB)FreqGHz0.5[2]0.91.82.4
Fmin[1]dB1.11.21.51.8
ΓOPT
Rn1.100.960.660.47
20MSGS2110MAGNotes:
1. Matching constraints may make Fmin values associated with high |Γopt| valuesunachievable in physical circuits. See Fig. 2 for expected performance.2. 0.5 GHz noise parameter values are extrapolated, not measured.
0012345FREQUENCY (GHz)Figure 25. AT-30511 Gains vs.Frequency at VCE= 5 V, IC= 5 mA.
AT-30533 Typical Scattering Parameters, VCE = 5 V, IC = 5 mA, Common Emitter, ZO = 50 Ω
Freq.GHz0.10.50.91.01.51.82.02.43.04.05.0
S11
MagAng0.860.590.400.370.270.240.230.200.180.170.16
-11-37-43-43-40-37-35-30-24-14-2
dB22.2218.6915.1914.4311.4910.119.337.976.404.583.37
S21Mag12.928.605.755.273.753.202.932.502.091.701.47
Ang1651221019782757062513621
dB-40.16-28.05-24.14-23.37-20.30-18.88-18.05-16.55-14.64-12.00-9.83
S12Mag0.010.040.060.070.100.110.130.150.190.250.32
30Ang8372707068676664615446
S22
MagAng0.980.810.740.730.700.690.680.670.660.640.61
-5-18-22-22-26-28-30-33-38-49-60
AT-30533 Typical Noise Parameters,
Common Emitter, ZO = 50 Ω, 5 V, IC = 5 mA
Mag0.710.610.420.28
Ang8163957
0.780.660.410.25
GAIN (dB)FreqGHz0.5[2]0.91.82.4
Fmin[1]dB1.11.21.51.8
ΓOPT
Rn
20MSGMAG10S21MSG0Notes:
1. Matching constraints may make Fmin values associated with high |Γopt| valuesunachievable in physical circuits. See Fig. 2 for expected performance.2. 0.5 GHz noise parameter values are extrapolated, not measured.
012345FREQUENCY (GHz)4-31
Figure 26. AT-30533 Gains vs.Frequency at VCE= 5 V, IC= 5 mA.
元器件交易网www.cecb2b.com
Ordering Information
Part NumberAT-30511-BLKAT-30511-TR1AT-30533-BLKAT-30533-TR1
Increment
10030001003000
Comments
Bulk7\" ReelBulk7\" Reel
Package Dimensions
SOT-23 Plastic Package
1.02 (0.040)0.89 (0.035)0.54 (0.021)0.37 (0.015)CPACKAGE MARKINGCODEB0.60 (0.024)0.45 (0.018)1.40 (0.055)1.20 (0.047)E2.65 (0.104)2.10 (0.083)XXX2.04 (0.080)1.78 (0.070)TOP VIEW3.06 (0.120)2.80 (0.110)1.02 (0.041)0.85 (0.033) 0.10 (0.004)0.013 (0.0005)SIDE VIEW0.152 (0.006)0.066 (0.003)0.69 (0.027)0.45 (0.018)END VIEWDIMENSIONS ARE IN MILLIMETERS (INCHES)SOT-143 Plastic Package
0.92 (0.036)0.78 (0.031)PACKAGEMARKINGCODEECXXXBE0.54 (0.021)0.37 (0.015)1.40 (0.055)1.20 (0.047)2.65 (0.104)2.10 (0.083)0.60 (0.024)0.45 (0.018)2.04 (0.080)1.78 (0.070)3.06 (0.120)2.80 (0.110)0.15 (0.006)0.09 (0.003)1.02 (0.041)0.85 (0.033) 0.10 (0.004) 0.013 (0.0005)DIMENSIONS ARE IN MILLIMETERS (INCHES)
0.69 (0.027)0.45 (0.018)4-32
因篇幅问题不能全部显示,请点此查看更多更全内容